SCJ-65U2x1.5F 5L Blow Moulding Machine

Production Info

Category: 5L Blow Molding Machine, Blow Moulding Machine
Applicable materials: PE, PP
Usage: luggage barrel tank, hollow plates, tubes, boxes, balls
Production capacity: 60kg / h Yield: 5L gear oil bottle, 250g, 5000 pcs / day (Output varies on different Factor, please consult our sales engineer for accurate output of your product)
Mold frame number: 2
Number of Die heads: 1
Screw diameter: main screw 65mm, view stripe screw 25mm,
The maximum open-distance: 450 (mm)
Clamping minimum distance: 200(mm)
Whether it contains thickness control: yes
Warranty Period: whole year warranty,all life service
Whether to provide custom processing: Yes

Brief Introduction

65-25U2X1.5F	Example	Oil bottle 4L, 210g
Twin station single cavity blow moulder up to 5L	Output	180pcs/hr 4300pcs /day 1.5 million/year

General Features

The screw diameter is 65mm;
Single die head, double station and double layer(could be figure by double die head ,four die head);
Scissors toggle clamping system, high rigidity mold clamping, clamping force is larger than before,force under the clamping plate is uniform;
High accuracy linear guide rail, fast moving speed and stable production;
Thanks to the double pump & proportion flow valve, the power consumption can be decrease;
Configured with thickness control system;
Integration of various take-out concepts;
Modern, ergonomic and easy-to-use screen controls with Touchscreen and industrial PC networking of intelligent peripheral devices(both WIFI and 3G net work are valid);
can be provided with IML (in-mould-labeling);
The maximum blow volume is 5L,PE、PP、PS、PC、PVC can be used, suitable for production of 5L lubrication bottle、5L cleaning stuff bottle、toy and auto parts.

Technical Data

General Features

Carriage horizontal shuttle stroke	mm	500
Dry cycle	sec	4.3"
Clamp force	kN	78
Pressure of Hydraulic System	Mpa	14
Pressure of Pneumatic System	Mpa	0.6-0.8
Pressure of Cooling System	Mpa	0.2-0.3
Air consumption (estimated)	M3 / hr	5
Minimum pressure for cooling water to machine	Mpa	0.2
Power of pump motor for hydraulic movements	kW	7.5
Power of servo pump motor(if needed)	kW	(5.5)
power of Die head heating	kW	5
Power of knife	kW	2
Total power installed (estimated, maximum)	kW	42.2(47.7)

Extruders

Screw diameter	mm	65
Extruder rotating speed	/	20~67
Power of electric motor	kW	15
Power of barrel heating	kW	9
Max throughput = PE	kg/h	60
Max throughput = PP	kg/h	40

Mould Dimensions

Maximum	A	mm	300
Maximum length	B	mm	365
Minimum Depth	C	mm	100
Clamp open max daylight	D	mm	450
Open stroke	E	mm	250
Max weight of mould		kg	100

Production Possibilities

Cavities		1	2		4
Max center distance	mm	/	120/150		65/70/85/100
Max container	mm	280	110/140		55/60/75/90
Max container	mm	245	245		245
Max container depth	mm	135	135		135
Container capacity (estimated)	lt	5	2		0.5

Machine Dimensions

Maximum	mm	3600/(2150)
Maximum length	mm	3800
Maximum	mm	2450
Total weight	kg	8500