EPET06-4H Stretch Blow Molding Machine

Description

Leshan PET stretch blow molding machine is used to blow various shapes of bottles for containing chemicals, cosmetics, pesticide, etc. Our all-electric PET blowing machines can be divided into cold-filling and hot-filling series. Adopting energy-saving servo control, it can keep high-speed mold clamping while saving 30% energy comparing to the same kind of machines made by other automatic blowing equipment manufacturers.

Features

1. EPET06-4H stretch blow moulding machine adopts energy saving servo control that not only could accomplish high-speed mold open & close but also save 30% energy compare to the machines manufactured by other PET bottle molding machinery suppliers.
2. The mold clamping plate adopts the special design of three-plates self-locking that could clamp fast at first then get slow mutely, meeting the demand of the increasing clamping force.
3. The heating box structure is designed at 6 adjusted zones. It fulfills different heating requirements for different length of tube.
4. This stretch blow moulding machine features stable pneumatic system, smooth buffering performance and low noise.
5. It is controlled by all electric servo motor, avoiding the hydraulic oil leakage and contamination.
6. It is with four cavities. The maximum blow volume is 0.6 L.
7. These machines have a unique design according to the effect on the PET material. Multiple blowing steps reduce PET residual stress.
8. Hot fill PET bottles are able to stand high temperatures ranging from 82°C to 95°C without deformation. This is an incredible success in the hot fill beverage domain.
9. EPET06-4H stretch blow moulding machine is operated by user-friendly PLC system.
10. Preform positioning is conducted by servo-motor technology.
11. It is en ideal solutions for medium output production needs.

Technical Specifications

Molding Specification	Output (Basic on 0.6 L Bottle)	bph	5800
	Clamping Force	kN	480
	Max. Mold Stroke	mm	100
	Mold Thickness	mm	180
	Max. Mold Size (H × W)	mm	320 × 312
	Stretching Stroke	mm	340
	Bottom Stroke	mm	50
	Cavity Distance	mm	76.2
	Number of Cavities	/	4
Bottle Specification	Max. Bottle Capacity	L	0.6
	Neck Diameter Range	mm	18-35
	Bottle Diameter	mm	68
	Bottle	mm	240
Electrisify Specification	Heating Power	kW	32
	Preform Feeding Motor	kW	0.25
	Rotating Motor	kW	0.12
	Revolution Motor	kW	1.5
	Clamping Motor	kW	3
	Total Power	kW	37
	Actual Power Consumption	kW	≤20
Air Compressor Specification (Basic on 0.6 L Bottle)	Operating Pressure	Mpa	0.7
	Low Pressure Air Consumption	m3/min	1.5
	Blowing Pressure	Mpa	3.5
	Hight Pressure Air Consumption	m3/min	4.5
Chiller Specification	Operating Pressure	kg/cm2	5
	Temperature Range	℃	25
	Heat Consumption	kcal/hr	40000
	Flow Rate	L/min	150
Machine Specification	Size (L × W× H)	m	3.8 × 2.15 × 2.5
	Weight	kg	5200
Mould Plate (mm)